Graco Fire-Ball 300 Pump - Koehler Rubber & Supply

To Order Call:
216.749.5100216.749.5100

Perfect for high pressure oil or grease dispense and transfer

Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life
Few moving parts in the air motor assembly means less downtime and low repair cost
Displacement rods have minimal wear due to a proprietary Graco manufacturing process
Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing
Thick cast aluminum air motor housing offers unmatched durability

5:1 Fire-Ball® 300 Pumps
Maximum fluid working pressure
	900 psi
Fluid Pressure Ratio
	5:1
Air pressure operating range
	40 to 180 psi
Maximum air consumption
	13 cubic ft/min for first gpm pumped at 100 psi, up to 8 additional cubic ft/min for each additional gpm with pump operated within recommended range
Pump cycles per gallon (liters)
	30 per gal
Recommended speed for optimum pump life
	70 cycles per min
Wetted Parts
	steel, aluminum, buna-N, urethane,
Sound pressure level (measured at 1 m from unit)
	77.8 dB(A)Sound
Sound power level (tested in accordance with ISO 9614–2)
	85.6 dB(A)
Approximate Weight
	17 lb
Loctite® is a registered trademark of the Loctite Corporation.

15:1 Fire-Ball 300 Pumps
Maximum working pressure	2700 psi
Fluid pressure ratio	15:1
Air operating range	40 to 180 psi
Air motor effective diameter	3 in
Stroke	3 in
Air consumption	17 cfm/gal pumped at 100 psi. Up to 30 cfm with pump operated at 180 psi and 66 cycles/min
Pump cycles	90 cycles/gal
Delivery	0.66 gal/min
Maximum recommended continuous pump speed	66 cycles/min, 0.7 gpm
Recommended speed for optimum pump life	15 to 25 cycles/min
Wetted parts	Carbon Steel, Brass, Copper, Aluminum, PTFE, Nitrile Rubber, Leather
Approximate	22 lb