RECOMMENDED FOR: Paint spray applications, as well as transfer of petroleum based products (aliphatic, aromatic and chlorinated hydrocarbon such as Toluene, Xylene, Benzene, gasoline and carbon tetrachloride). Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. CAUTION: Contact Denver Product Application (303) 744-5070 when conveying chemicals […]
The following features are standard on GFS Open Face Paint Booths: Heavy-Duty Panels GFS Open Face Booths are constructed with single-skin, 18-gauge, G-90 galvanized steel. Solid Construction Pre-punched booth panels and nut-and-bolt assembly takes the guesswork out of installing a paint booth, and provides more structural integrity. Exhaust Chamber Air is filtered through an exhaust […]
The Nordson Encore LT manual powder coating system is designed for rugged, everyday use. Incorporating all the right features at an affordable price, the Encore LT system is durable, easy to use and service, and offers superior transfer efficiency and overall coating performance for producing the highest quality finished products. The Encore LT manual powder […]
Meets 42 CFR Part 84 Standards. Binks Millenium 3000 – Premium Paint Spray Respirators. A charcoal filter respirator with a Silicone face piece, Adjustable straps, and Fully serviceable with the Binks tune-up kit – (40-1928) Binks Millenium respirators are not to be used with urethane paints or any other paints containing di-isocyanates. Painters using urethanes […]
FRC-650 All-In-One combines a filter, regulator and coalescer for shop air into one compact unit. Four 1/4″ NPS (M) ball valves with unrestricted air passages, (three regulated plus one unregulated outlet.) Ball valves inclined 45º—avoids kinking of hoses, which increases life span. Robust and durable. Solvent-resistant filter bowl and body is indispensible in the spray […]
Excellent for eliminating moisture and dirt from an air supply, DeVilbiss CleanAir centrifugal units supply cleaner, drier air to each spray gun. Cleaner air can increase the life of pneumatic tools. Filters out water and oil aerosols and dirt particulates to 5 microns. Water droplets collected in the bowl are removed by an automatic drain […]
Pressure feed 2 gallon tank outfit with spray gun and hoses. Requires 10-14 CFM at 20-27 PSI, includes 1.1mm & 1.4mm tips Name: SV100 2 Gallon Pressure Feed outfit Part Number: 98-3163 Gun: SV100 HVLP Pressure Feed Pump: no pump Tank: 83C-220 Two-gallon, zinc plated tank with dual regulators. Market: Painter-Decorator-Contractor
© 2024 Koehler Rubber & Supply Co. | All rights reserved.
