Pro Xp Auto Waterborne Electrostatic Spray Guns

To Order Call:

Ideal for spraying waterborne materials with isolation systems, the Pro Xp waterborne gun is available in air spray and air-assist models.

Pro Xp Air Spray: For low pressure spraying with an isolation system including the WB100.

Pro Xp Air-Assist: For high pressure spraying with an isolation system including the WB3000. Delivers a fine finish with an AEF or AEM tip.

Pro Xp Control Module

The Pro Xp Auto smart gun models connect right to the control module so you can see exactly how your gun is performing 24/7. With our control module, you can easily change the kV setting to optimize spray parameters for less touch up and a better finish quality on your parts.

Electrostatic gun do not include a control module or fiber optic cable. Order items separately.

  • Versatile product line gives you more models to choose from and greater spraying flexibility
  • Manifold style fits almost any systems requirement – back manifold is ideal for a variety of systems 
  • 60 kV power supply and internal power so there’s no electrical cord to worry about damaging or replacing
  • Higher transfer efficiency equals less waste, saving you money on material
  • Made in the USA
  • Durable components reduce cost of ownership, supported by a three year warranty

Pro Xp Auto Waterborne Air Spray Gun

Maximum fluid working pressure

100 psi

Maximum working air pressure

100 psi

Maximum air pressure at gun inlet

40 psi

Maximum fluid operating temperature


Paint resistivity range

3 megohm/cm to infinity

Short circuit current output

125 microamperes

Gun Weight (Approximate)

2.6 lb

Voltage Output

Standard Models

60 kV

Smart Models

30-60 kV

Noise (dBa)

Sound Power (measured per ISO Standard 9216)

at 40 psi: 90.4 dB(A)at 100 psi: 105.4 dB(A)

Sound Pressure (measured 1 m from gun)

at 40 psi: 87 dB(A)at 100 psi: 99 dB(A)

Inlet/Outlet Sizes

Turbine air inlet fitting, left-hand thread

1/4 npsm(m)

Atomizing air inlet fitting

5/16 in. OD nylon tube (8 mm)

Fan air inlet fitting

5/16 in. OD nylon tube (8 mm)

Cylinder air inlet fitting

5/32 in. OD nylon tube (4 mm)

Fluid inlet fitting

1/4-18 npsm(m)

Materials of Construction

Wetted Parts

Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene