6,000 psi (408 bar) maximum operating pressure For all hydraulic type grease fittings Small outside diameter permits easy contact with recessed fittings Built-in ball check prevents leak and lubricant backup Inlet 1/8 in. NPT(f) Bulk model 245978
Model 5852
One hydraulic coupler in a resealable clamshell 3-jaw design
Model 5845
7,500 psi (517 bar) maximum operating pressure 11/16 in. hex Inlet 1/8 in. NPT(f) Bulk model 245976
Model 5848 adapter
7,500 psi (517 bar) maximum operating pressure Built-in swivel allows full 360° circle Locks in any one of eight 45° positions Adjustable coupler section permits contact with fittings in reverse positions Angle body has 1/8 in. NPT(f) inlet permits addition of pipe extension when required
Model G300 adapter
For use with most hand-operated grease guns and equipment 1/8 in. NPT 4-jaw design
Model 5883 90° grease coupler
Provides access to difficult to reach fittings Allows for easy lubrication in tight areas
Model 80933
4,000 psi (276 bar) maximum operating pressure For pull-on, push-on or hook-on service Use with large 7/8 in. (22mm) diameter button-head fittings 7/16 in.-27(f) thread Model 81458 Same as model 80933 except for 5/8 in. (16mm) diameter button-head fittings
Model 10460
5,000 psi (345 bar) maximum operating pressure For adapting standard or large button-head couplers to hose with 1/8 in. NPT connections 1/8 in. NPT(f) x 7/16 in.-27(m) thread Use gasket model 31138, not included.
Model 10536
4,500 psi (310 bar) maximum operating pressure For adapting standard or large button-head couplers to hose with 3/8 in. NPT connections 3/8 in. NPT(f) x 7/16 in.-27(m) thread Use gasket model 31138, not included.