To Order Call:
216.749.5100216.749.5100
- Applications
- Insulation
- Protective Coatings
- Materials
- Fast-set
- Foam
- Protective Coatings
Whether you’re spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.
- Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
- Long-lasting PolyCarballoy mix module
- Advanced mix module and tip provides superior mixing capabilities
|
Fusion Plural Component, Impingement Mix Mechanical Purge Spray Gun |
|
|
Maximum Fluid Working Pressure |
3500 psi |
|
Minimum Air Inlet Pressure |
80 psi |
|
Maximum Air Inlet Pressure |
130 psi |
|
Maximum Fluid Temperature |
200°F |
|
Air Inlet Size |
1/4 npt Quick Disconnect Nipple |
|
A Component (ISO) Inlet Size |
-5 JIC; 1/2-20 UNF |
|
B Component (Resin) Inlet Size |
-6 JIC; 9/16-18 UNF |
|
Typical Flow rate |
See charts in instruction manual |
|
Sound Pressure |
70 dB(A), at 100 psi (0.7 MPa, 7 bar) |
|
Sound Power, measured per ISO 9416–2 |
79.9 dB(A), at 100 psi (0.7 MPa, 7 bar) |
|
Length |
7.6 in. |
|
Height |
8.1 in. |
|
Width |
3.1 in. |
|
Weight |
2.9 lb |
|
Wetted Parts |
Aluminum, stainless steel, carbon steel, chemically resistant o-rings, ultra-high molecular weight polyethylene (UHMWPE), Polycarballoy™, CeramTip™ |