To Order Call:
216.749.5100216.749.5100
Handles:
- PVC sealers with glass or plastic filler
- Low to high abrasive fluids
- Waterborne or solventborne materials
- Most fluids up to 150,000 centipoise
Features:
- Well-suited for dispensing onto horizontal surfaces
- Selectable trigger lock and hanger slot for operator convenience
- Accepts flanged or threaded tips for a variety of dispensing needs
- 204355 has rugged, lightweight design
- 240199 has lowest trigger force and weight in its class
Ultra-Lite In-Line Flow Gun |
|
Maximum working pressure |
3400 psi |
Maximum temperature |
120°F |
Flow rate at 2000 psi (14 MPa, 138 bar)* |
Model 240–199: 158 oz/min |
Model 240–200: 154 oz/min |
4.4 kg/min |
Outlet port size |
1/4 npt(f) and flange |
Inlet port size |
1/4 npt(f) |
Dry weight |
Model 240–199: 11.6 oz |
Model 240–200: 11.6 oz |
325 gm |
Length |
5.9 in |
Width |
2.6 in |
Thickness |
0.85 in |
Pressure vessel material |
Aluminum |
Pressure vessel ID |
0.25 in |
Gun seat diameter |
Model 240–199: 0.125 in |
Model 240–200: 0.203 in |
5.2 mm |
Needle seat type |
Model 240–199: Carbide ball |
Model 240–200: 7 Tapered carbide |
|
Inlet/outlet angle |
20° |
Trigger force – breakaway @ 1000 psi (7 MPa, 69 bar) |
Model 240–199: 1.6 lb |
Model 240–200: 3.8 lb |
1.72 kg |
Trigger force – breakaway @ 2000 psi (14 MPa, 138 bar) |
Model 240–199: 2.2 lb |
Model 240–200: 7.3 lb |
3.31 kg |
Trigger force – sustaining |
Model 240–199: 3.2 lb |
Model 240–200: 2.8 lb |
1.27 kg |
Wetted parts |
Aluminum, stainless steel, carbide, polyethylene, CV75 |
CV75 is a registered trademark of the International Seal Co., Inc. |
|
* Flow rates were measured using PVC sealer dispensed through a 1/8 in. diameter orifice nozzle and z-swivel connected to inlet. Actual flow rates will vary depending on material type, fluid pressure, nozzle size, and system configuration. |