To Order Call:
216.749.5100216.749.5100
The Model 1052 & 1053 rod positive displacement valves are designed for volumetric shot-to-shot (1052) or bead (1053) dispensing of a wide variety of materials.
- For low to high viscosity materials with various wetted component configurations
for abrasive filled, or corrosive materials - 1052 is a pneumatically-controlled valve with micrometer adjustable dispense volumes
for accurate, repeatable shot dispensing - 1053 is a servo-driven valve for programmable, precise shot or bead dispensing
- Pneumatic and electronic controls can be integrated for automated applications
- Positive displacement metering
- Wide array of wetted components
|
Dispensit 1053-10C |
|
|
Maximum Ambient Temperature |
110°F |
|
Maximum Operating Temp |
300°F |
|
Maximum Outlet Fluid Working Pressure |
2000 psi |
|
Maximum Air Working Pressure |
100 psi |
|
Minimum Air Working Pressure |
70 psi |
|
Maximum Material Inlet Pressure |
Metal Sleeves: 1200 psi |
|
Plastic Sleeves: 400 psi |
2.8 MPa, 28 bar |
|
Supplied Air Requirements. |
1 to 3 cfm at 80 psi to 100 psi |
|
Shot Size Range (depending on metering rods selected) |
0.002 cc to 3.150 cc |
|
Maximum Cycle Rate (application dependent, heat required) . |
Up to 15 cycles per minute (with standard Graco motor) |
|
Dimensions (H x L x W), height to end of material inlet |
1 in.: 14.83 x 6.23 x 2.91 in. |
|
2 in.: 17.85 x 6.23 x 2.91 in |
453 x 158 x 74 mm |
|
Graco-supplied Feed System Assemblies (depends on selected options): |
|
|
Smallest: 22.5 x 10 x 4 in. |
572 x 254 x 102 mm |
|
Largest: 60 x 28 x 19 in. |
(1524 x 711 x 483 mm |
|
Weight |
Metering Valve: 3 – 5 lb |
|
Wetted Parts |
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel |
|
Dispensit 1052 |
|
|
Maximum Ambient Temperature |
110°F |
|
Maximum Operating Temp |
150°F |
|
Maximum Outlet Fluid Working Pressure |
2000 psi |
|
Maximum Air Working Pressure |
100 psi |
|
Minimum Air Working Pressure |
70 psi |
|
Maximum Material Inlet Pressure |
Metal Sleeves: 1200 psi |
|
Plastic Sleeves: 400 psi |
2.8 MPa, 28 bar |
|
Supplied Air Requirements. |
1 to 3 cfm at 80 psi to 100 psi |
|
Shot Size Range (depending on metering rods selected) |
0.002 cc to 3.600 cc |
|
Maximum Cycle Rate (application dependent, heat required) . |
Up to 60 cycles per minute |
|
Dimensions (H x L x W), height to end of material inlet |
16.13 x 5.52 x 2.75 in. |
|
Graco-supplied Feed System Assemblies (depends on selected options): |
|
|
Smallest: 22.5 x 10 x 4 in. |
572 x 254 x 102 mm |
|
Largest: 60 x 28 x 19 in. |
(1524 x 711 x 483 mm |
|
Weight |
Metering Valve: 4 – 5 lb |
|
Wetted Parts |
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel |
|
Dispensit 1053-10B |
|
|
Maximum Ambient Temperature |
110°F |
|
Maximum Operating Temp |
150°F |
|
Maximum Outlet Fluid Working Pressure |
2000 psi |
|
Maximum Air Working Pressure |
100 psi |
|
Minimum Air Working Pressure |
70 psi |
|
Maximum Material Inlet Pressure |
Metal Sleeves: 1200 psi |
|
Plastic Sleeves: 400 psi |
2.8 MPa, 28 bar |
|
Supplied Air Requirements. |
1 to 3 cfm at 80 psi to 100 psi |
|
Shot Size Range (depending on metering rods selected) |
0.002 cc to 3.150 cc |
|
Maximum Cycle Rate (application dependent, heat required) . |
Up to 15 cycles per minute (with standard Graco motor) |
|
Dimensions (H x L x W), height to end of material inlet |
1 in.: 14.83 x 6.23 x 2.91 in. |
|
2 in.: 17.85 x 6.23 x 2.91 in |
453 x 158 x 74 mm |
|
Graco-supplied Feed System Assemblies (depends on selected options): |
|
|
Smallest: 22.5 x 10 x 4 in. |
572 x 254 x 102 mm |
|
Largest: 60 x 28 x 19 in. |
(1524 x 711 x 483 mm |
|
Weight |
Metering Valve: 3 – 5 lb |
|
Wetted Parts |
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel |