RECOMMENDED FOR: Transfer of refined fuels (commercial gasoline and diesel fuel), oils and other petroleum products. Ideal for oilfield truck use. CAUTION: Service life of transfer hoses can be extended by draining hoses after use. For bio-diesel and other alternative fuel applications, see Fuel Master® Xtreme™ 150SD (formerly Longhorn® AF). Petroleum transfer hoses may be used with all […]
RECOMMENDED FOR: Air and water applications requiring maximum flexibility in any industry, including mining, construction, agriculture, vehicle repair and in-plant operations. Outstanding resistance to heat and ozone. Suitable for light agricultural spraying, such as dilute solutions of herbicides. TEMPERATURE: -40°F to +200°F (-40°C to +93°C) continuous service. CONSTRUCTION: Tube: Type P (EPDM). Black. Reinforcement: Synthetic, […]
Oil and petroleum suction and discharge hose Features 150 psi operating pressure -400F to 1800F temperature rating NBR tube and cover 2 or 4 ply reinfocement with dual helical wire 4:1 Safety Factor Biodiesel Compatible 50% aromatic content resistant
RECOMMENDED FOR: Paint spray applications, as well as transfer of petroleum based products (aliphatic, aromatic and chlorinated hydrocarbon such as Toluene, Xylene, Benzene, gasoline and carbon tetrachloride). Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. CAUTION: Contact Denver Product Application (303) 744-5070 when conveying chemicals […]
RECOMMENDED FOR: Medium duty air and water applications where a hose with high electrical resistance is needed. TEMPERATURE: -20°F to +150°F (-29°C to +66°C) continuous service. CONSTRUCTION: Tube: Type P (EPDM). Green. Reinforcement: High tensile synthetic textile cord. Cover: Type P (EPDM). Red. Design Factor: 4:1 COUPLINGS: 19 (For sizes 3/16″ through 3/8″ only), 1, […]
Air and water transfer hose, with medium duty oil resistance Features 125-350 psi operating pressure -40 F to 180 F Cover: Modified rubber (Pin-pricked) 2-fiber spiral reinforcement Tube: Modified vinyl 4:1 safety factor
RECOMMENDED FOR: Air, water, oils, antifreeze solutions and applications where Lock-On fittings are used. CAUTION: Lock-On hose is not recommended for applications where vibrations or pressure surges exist. Do not use oil for Lock-On fitting insertion purposes. Not recommended for gasoline or diesel fuels. TEMPERATURE: -20°F to +212°F (-29°C to +100°C) normal service. For air: […]
RECOMMENDED FOR: Applications requiring a premium grade spiral hose with excellent flexibility and maximum resistance to air, water, petroleum oils and lubricating oils, (to 212°F). Recommended for gasoline, kerosene and fuel oil transfer only (to 120°F). Excellent weather and ozone resistance. Approved for breathing applications such as supplied air respirators. TEMPERATURE: -40°F to +212°F (-40°C […]
RECOMMENDED FOR: Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only. TEMPERATURE: -40°F to +200°F (-40°C to +93°C) continuous service. CONSTRUCTION: Tube: Type B1 (Specially compounded elastomer). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type P (EPDM). Red. All sizes through 1/2″ have perforated cover. […]
RECOMMENDED FOR: Air and water applications requiring maximum flexibility in any industry, including mining, construction, agriculture, vehicle repair and in-plant operations. Outstanding resistance to heat and ozone. Suitable for light agricultural spraying, such as dilute solutions of herbicides. TEMPERATURE: -40°F to +200°F (-40°C to +93°C) continuous service. CONSTRUCTION: Tube: Type P (EPDM). Black. Reinforcement: Synthetic, […]
© 2024 Koehler Rubber & Supply Co. | All rights reserved.
