Batch

In today’s marketplace, resources are always limited, contracts are hard to come by and floor space is at a premium. That makes versatility a prime consideration when buying any equipment. We offer a wide selection of sizes and variety of Global Finishing Solutions batch process ovens, including natural gas, propane, or electric operation. All of […]

Dry Filter Industrial Spray Booths

The following features are standard on GFS Open Face Paint Booths: Heavy-Duty Panels GFS Open Face Booths are constructed with single-skin, 18-gauge, G-90 galvanized steel. Solid Construction Pre-punched booth panels and nut-and-bolt assembly takes the guesswork out of installing a paint booth, and provides more structural integrity. Exhaust Chamber Air is filtered through an exhaust […]

Binks Millennium 3000 Half Face Respirator

Meets 42 CFR Part 84 Standards. Binks Millenium 3000 – Premium Paint Spray Respirators. A charcoal filter respirator with a Silicone face piece, Adjustable straps, and Fully serviceable with the Binks tune-up kit – (40-1928) Binks Millenium respirators are not to be used with urethane paints or any other paints containing di-isocyanates. Painters using urethanes […]

Devilbiss FRC-650 All-In-One Filter-Regulator-Coalesser Unit

FRC-650 All-In-One combines a filter, regulator and coalescer for shop air into one compact unit. Four 1/4″ NPS (M) ball valves with unrestricted air passages, (three regulated plus one unregulated outlet.) Ball valves inclined 45º—avoids kinking of hoses, which increases life span. Robust and durable. Solvent-resistant filter bowl and body is indispensible in the spray […]

Devibiss Clean Air Centrifugal Filter-Regulator Units

Excellent for eliminating moisture and dirt from an air supply, DeVilbiss CleanAir centrifugal units supply cleaner, drier air to each spray gun. Cleaner air can increase the life of pneumatic tools. Filters out water and oil aerosols and dirt particulates to 5 microns. Water droplets collected in the bowl are removed by an automatic drain […]

Binks 2 Gallon Pressure Feed Spray System

Pressure feed 2 gallon tank outfit with spray gun and hoses. Requires 10-14 CFM at 20-27 PSI, includes 1.1mm & 1.4mm tips Name: SV100 2 Gallon Pressure Feed outfit Part Number: 98-3163 Gun: SV100 HVLP Pressure Feed Pump: no pump Tank: 83C-220 Two-gallon, zinc plated tank with dual regulators.  Market: Painter-Decorator-Contractor  

Binks 2 Quart pressure Feed Spray System

Pressure feed 2 quart outfit with spray gun and hoses, air pressure recommended is 10-14 CFM/20-27 PSI, includes 1.1mm & 1.4mm tips Name: SV100 2 Quart Pressure Feed outfit Part Number: 98-3162 Gun: SV100 HVLP Pressure Feed Pump: No pump Tank: 2 Quart Cup Number of Colors: 1 Market: Painter-Decorator-Contractor